- Electronic Magic eye double sensitivity with an LCD screen
- Closing the first sector - 3.5 / - 4 V adjustable
- Close second sector - 15 V / - 16 V adjustable
- Input Impedance: 50 MOhm minimum
- Color of the programmable eye: red, cyan, blue, yellow, green, white.
- Frequency: performance with possibility of programming a frequency offset + or - of the measured frequency.
Measuring range: 0 to 6500 kHz
Input impedance of the frequency: 1 MOhm
Sensitivity: 30 to 100 mVpp by frequency
Maximum applicable voltage: 500V
Measuring range: 0 to 800 V
Input impedance 1 MOhm
Eye diameter 25 mm
Display: 30 x 36 mm / useful 31 x 45 mm overall
Total length: 67 mm
Maximum height: 45 mm over a length of 22 mm and 35 mm
Overall thickness: 32 mm
Powered by the voltage of the filament as a traditional magic eye and does not require high voltage
6.3 * VL: 6.3 V AC (less than 100 mA consumption) or 6-12 VDC
* 6.3 VH: 6.3V alternatifsou 6-12 VDC
* GRID control voltage of the eye (pin grid magic eye)
* END: Enter the frequency
* GND: receiver (cathode pin of the magic eye)
* + HT: Input voltmeter
-. Programming colors and display mode stored in memory even after power failure
The base color is the same as a green eye green CRT, the brightness is constant, very comfortable and does not change with time.
- Connections takes place by son, octal plug is available on request, the end of the eye can be embedded in it.
- Simple to install, this module can permanently replace any kind of magic eye circular as EM34, EM4, 6AF7 ...
- The eye is the look and the colors you want: single eye (no numerical data) or display all or some measurement functions with two font sizes to choose from.
- Frequency for example, display the frequency of received stations by connecting to the local oscillator of the receiver, the frequency offset will be programmed with the value of the intermediate frequency.
- Voltmeter for example, to know the value of the high voltage of the receiver.